|Place of Origin:||shenzhen|
|Brand Name:||Bo Chuang space time|
|Certification:||CE CCC FC|
|Minimum Order Quantity:||1|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Power Supply:||AC110-240V DC12V||Power:||88W|
Power adjustable 5G mobile phone signal jammer 14-channel frequency output
Name: Desktop multi-function adjustable 14-channel signal jammer
Shield the signal:
1: BCSK-101H-14KT-A: full frequency mobile phone signal 4G/3G/2G +WiFi2.4G5.8G+ GPSL1L2+ Beidou B1B2+ wireless pinhole camera 1.2G signal jammer
2: BCSK-101H-14KT-B: full frequency mobile phone signal 4G/3G/2G +WiFi2.4G+ GPSL1L2+ Beidou B1+ walkie-talkie, wireless headset, microphone UHF/VHF jammer
3: BCSK-101H-14KT-C: full frequency mobile phone signal 4G/3G/2G +WiFi2.4G+ GPSL1+Beidou B1+RC433 315+ walkie-talkie, wireless headset, microphone UHF/VHF
Transmitting power: 30W, 1-3W per segment
Shielding range: 5-40 meters
Power supply specification: AC110-240v to DC12V (independent research and development and production of high-quality power adapter 12V16A 200W)
Cooling system: high-efficiency aluminum alloy profile large radiator, built-in 4 cooling fans
Use time: continuous work 24/7
Product size: 410x 238x 60mm (without antenna length)
Weight: about 6.5kg
Packaging details: Shield host x1, omnidirectional antenna x14, power adapter x1, power cord x1, battery cable x1
Full-band 14-channel design, can customize a variety of frequencies required by customers, contact the manufacturer for details
Total output power: 30W, the maximum shielding distance is 40 meters (depending on the specific use environment and signal strength)
Independent module design for each channel, customizable frequency, easy maintenance
Knob switch design, adjust the power output individually, control each section of the switch, energy saving and environmental protection
Equipped with a car DC12V battery cable to directly support the work of the device, and a high-quality AC 110V-240V 200W power adapter
High-efficiency aluminum alloy profile large radiator, built-in 4 cooling fans, continuous work all day long
The BCSK-101H-14KT product of Borch Time-space brand adopts broadband scanning technology according to the principle of mobile phone (radio communication) to cut off mobile phone 2G 3G 4G,5G jammer, Wi-Fi, GPS, walkie-talkie, wireless microphone, invisible earphone, wireless pinhole camera and other wireless equipment The wireless signal connection is shown as searching for the network, no signal, no service system, etc. Adopt brand imported components, independent research and development and production, stable performance and long-term durability! Best-selling domestic and foreign markets.
This product supports long-term uninterrupted work, can be placed on the desktop or installed on the wall, and is easy to use. It can be used in various environments with different areas through independent and distributed distribution.
Domestic and foreign mobile phone signals, GPSL1-L5, WIFI2.4G 5.8G 3.6GHz, CDMA450 and other frequencies can be customized, bulk orders can be screen printed LOGO, provide OEM/ODM services
Examination rooms, prisons, military sites, courts, conference rooms, theaters, hospitals, government agencies, financial institutions, churches, monasteries, libraries, business negotiations, gas stations, personal privacy protection and other places that require silence, confidentiality and information security .
Basic knowledge of shield
Installation and usage instructions
1 Take out the shield main unit from the box;
2. Screw the antennas into their corresponding antenna bases, otherwise it will be invalid;
3. Hang the shield on the wall or the corresponding position, the best installation height is 1-2 meters;
4 Turn on the switch of the power supply, the work indicator on the power supply is on, indicating that it starts to work. If it is a style with a built-in lithium battery, please ensure that it is fully charged before use.
1. The antenna must be installed according to the corresponding mark on the host, and then connect the power of the host.
2 The effective coverage of the shield is a circular area centered on the shield, so pay attention to the correct placement of the shield when using it to avoid shielding dead angles; if it is a directional antenna, you can adjust the alignment target according to the standard sector angle of the antenna direction.
3. The shielding device should be placed in a well-ventilated place, try to avoid the shielding of large objects, and avoid strong electromagnetic sources of strong heat sources to ensure the shielding effect and long-term stable operation.
4 When the shield is working, do not stack other items on it and remove the antenna, so as not to affect the shielding effect and damage the machine.
5 When the shield is not in use, the power supply should be cut off in time, so as not to affect the normal use of the mobile phone.
6 When using the shielding device outdoors, pay attention to dustproof and waterproof. Please keep away from corrosive gases and liquids, and do a good job of dustproof and moisture-proof, so as not to accelerate the aging of the internal components of the equipment
7 When the area of the site used is larger than the effective shielding range, it is recommended to use multiple isolators for cellular installation to ensure the shielding effect.
8 Since the power supply and antenna are dedicated to the host, and they are debugged one by one during factory debugging, please try not to use them interchangeably to ensure the best effect. .
9 This shield has a one-year warranty and lifetime maintenance.
Questions and Answers
1 When the signal jammer is working, why some mobile phone signal indicators still have signal indicators?
A: This is just an illusion. In fact, the mobile phone has been unable to communicate at this time. When you press the unplug button at will, you will find that there is no signal indication on the signal indicator.
2 Will the signal jammer interfere with the normal operation of other electronic devices?
Answer: No. This is because the electromagnetic signal emitted by the signal jammer completely falls within the working frequency band of the mobile phone stipulated by the state, which will only block the communication of the mobile phone. And this signal is always in a relatively static state and will not affect any electronic equipment.
3Is the signal jammer harmful to the human body and mobile phone?
Answer: Please rest assured that the strength of the electromagnetic signal emitted by the signal jammer is very weak. The test data shows that the strength of this signal is far from harming the human body. At the same time, the signal blocker only blocks the forward signal of the mobile phone, so that the mobile phone cannot contact the base station, so it will not cause any damage to the mobile phone itself at all.
4Is there any difference in the working distance of the signal jammer when it is used indoors and outdoors?
Answer: Yes. The effective distance of the signal jammer (10-40 meters) generally refers to the indoor distance. In outdoor open areas, the effective distance of shielding can reach several hundred meters. It should be pointed out that whether it is used indoors or outdoors, the effective working distance of the shield has a certain relationship with the environmental conditions at that time, such as the distance from the base station and the placement position. Therefore, when using the signal shield, this factor should be fully considered to avoid the occurrence of shielding dead corners and thus affect the shielding effect.
5 Does the signal jammer have the same effect on GSM mobile phones and CDMA mobile phones?
A: This is a good question. Since the anti-interference performance of CDMA mobile phones is far better than that of GSM mobile phones, the effective shielding distance of signal jammers for CDMA mobile phones is smaller than that of GSM mobile phones, but the difference is not very large, about 2-4 meters. However, users are also reminded that in some particularly important places, the number of signal jammers in the field should be increased if necessary to ensure the shielding effect of CDMA mobile phones.
6 After the signal jammer works for a period of time, the casing becomes hot. Will it damage the machine after working for a long time?
A: Thank you for your attention, this is a normal phenomenon. In terms of design, we use the thermal conductivity of the aluminum alloy wire drawing case to assist in heat dissipation. This ensures long-term stable operation. Therefore, a hot case will not damage the machine.