10 channel mobile phone signal jammer handheld portable with protective leather case 2g.3g.4g.5g mobile signal jammer

10 channel mobile phone signal jammer handheld portable with protective leather case 2g.3g.4g.5g mobile signal jammer

Dear friends, Shenzhen Bochuang spatiotemporal Communication Technology Co., Ltd. is a

professional jammer manufacturer, focusing on mobile phone signal jammer, GPS jammer, UAV

anti-jamming equipment, signal detector, detection system and other security equipment. If

you need to contact or inquire, please email us 1369199493@qq.com , official website

www.szbcsk.com Tel: 86013798491049

Product information
Name: enhanced version of Bochuang spacetime brand handheld 10 Channel Signal Jammer (with portable protective case)
Model: BCSK-N10
Color: gray
Basic specifications

Shielded signal:
1: Bcsk-n10-w: full band mobile signal 4G / 3G / 2G + wifi-2.4g + WiFi 5.8G
2: Bcsk-n10-g: full band mobile signal 4G / 3G / 2G + gpsl1 / BeiDou B1 + gpsl2l5 / BeiDou B2
Transmit power: 7W, average 0.7W per segment
Shielding range: 2-20m
Power supply specification: ac110-240v to DC12V
Cooling system: the extended version has 3 internal and external cooling fins and a built-in cooling fan
Service time: the built-in high-capacity lithium battery is 7.4v8000mah, and the continuous operation is not less than 2 hours
Product size: 160 * 83 * 46 mm (excluding antenna length, with high gain, extended antenna: 166mm, 2.0dbi gain)
Weight: About 1.5kg
Package details: shield host x1, omni-directional antenna X10, charger x1, on-board charging line x1, protective sleeve x1
Functional features
Enhanced design, built-in 7.4v 8000ma/h battery, full charge time of about 7 hours, sustainable operation of no less than 2 hours
Total output power: 7W, maximum shielding distance: 20m (depending on the specific use environment and signal strength)
The dial switch is designed to control the power output of each section of the switch separately. There are 3 heat sinks inside and outside the extended version, and a built-in heat dissipation fan
Equipped with military nylon protective sleeve, portable and safe
Equipped with on-board DC12V cigarette lighter interface charging line and high-quality AC 110V-220V plug
The machine supports, but it is not recommended to charge and use it at the same time for a long time, which will accelerate the aging of the machine and battery and affect the service life of the equipment.
Product description
Bcsk-n10 mobile phone signal jammer is based on the principle of mobile phone (radio communication) and adopts broadband scanning technology to cut off the wireless signal connection of mobile phone, Wi Fi, GPS, walkie talkie and other phenomena, such as search network, no signal, no service system and so on. Using brand imported components, independent R & D and production, stable performance and long-term durability! It sells well in domestic and foreign markets.
This product is small in size and easy to use. Through separate and distributed distribution, it can be applied to a variety of environments with different areas.
Custom service
Domestic and foreign mobile phone signals, gpsl1-l5, CDMA450 and other frequencies can be customized. For batch orders, silk screen logo can be printed to provide OEM / ODM services
Application occasion
Military, VIP escort, examination room, prison, military place, court, conference room, theater, hospital, government agency, financial institution, church, temple, library, business negotiation, gas station, personal privacy protection and other places that need silence, confidentiality and information security.

matters needing attention
1. The jammer antenna of Bochuang space-time brand must be installed according to the corresponding marks on the host, and then the host power supply must be connected.
2. The effective coverage of the shield is a circular area centered on the shield, so pay attention to correctly select the placement position of the shield to avoid shielding dead angle; If it is a directional antenna, the alignment direction can be adjusted according to the standard sector angle of the antenna.
3 the shield shall be placed in a well ventilated place, avoiding the shielding of large objects and the strong electric and magnetic source of strong heat source as far as possible, so as to ensure the shielding effect and stable operation for a long time.
4 when the Bo Chuang space-time brand jammer works, it is not allowed to stack other items and disassemble the antenna on it, so as not to affect the shielding effect and damage the machine.
5 when the shield is not in use, the power supply should be cut off in time to avoid affecting the normal use of the mobile phone.
6 when using the shield outdoors, pay attention to dust prevention and waterproof. Please keep away from corrosive gases and liquids, and do a good job in dust and moisture prevention, so as not to accelerate the aging of internal components of the equipment
7 when the site area used is larger than the effective shielding range, it is recommended to use multiple shields for honeycomb installation to ensure the shielding effect.
8. Since the power supply and antenna are specially matched with the host and are debugged one by one during factory debugging, please try not to use them interchangeably to ensure the best effect..
9. Bochuang spatiotemporal brand jammer has a one-year warranty and lifelong maintenance.

Problem solving
1 Why is there still signal indication on some mobile phones when Bochuang spatiotemporal brand jammer works?
A: This is just an illusion. In fact, at this time, the mobile phone has been unable to communicate. When you press the pull-out button at will, you will find that there is no signal indication on the signal indicator.
2 will the signal shield interfere with the normal operation of other electronic equipment?
A: No. This is because the electromagnetic signal sent by the signal shield completely falls within the working frequency band of the mobile phone specified by the state, which will only block the mobile phone communication. And this signal is always in a relatively static state and will not affect any electronic equipment.
3 is Bochuang spatiotemporal brand jammer harmful to human body and mobile phone?
A: please rest assured that the electromagnetic signal intensity emitted by the signal shield is very weak. The test data show that this signal intensity will not cause harm to the human body. At the same time, the signal shield only blocks the forward signal of the mobile phone, so that the mobile phone can not contact the base station, so it will not cause any damage to the mobile phone itself.
4 is there any difference in the action distance between indoor and outdoor signal shields?
A: Yes. The effective distance (10-40m) of signal shield generally refers to the indoor distance. In outdoor open areas, the effective distance of shielding can reach hundreds of meters. It should be noted that whether used indoors or outdoors, the effective working distance of the shield is related to the environmental conditions at that time, such as the distance from the base station, the location, etc. Therefore, when using the signal shield, this factor should be fully considered to avoid shielding dead angle, which will affect the shielding effect.
5 is the effect of Bochuang spatiotemporal brand jammer on GSM mobile phones and CDMA mobile phones the same?
A: that's a good question. Because the anti-interference performance of CDMA mobile phones is much better than that of GSM mobile phones, the effective shielding distance of signal shield for CDMA mobile phones is less than that of GSM mobile phones, but the difference is not very large, about 2-4m. However, users are also reminded that in some particularly important places, if necessary, the number of signal shields in the field should be increased to ensure the shielding effect of CDMA mobile phones.
6. The casing of Bochuang spatiotemporal brand jammer is hot after working for a period of time. Will it damage the machine after working for a long time?
A: Thank you for your care. This is a normal phenomenon. In design, we use the thermal conductivity of aluminum alloy wire drawing casing to assist heat dissipation. So as to ensure long-term stable operation. Therefore, the hot casing will not damage the machine.