1. Scope:
Bochuang spatiotemporal brand UAV reaction equipment UAV driver equipment UAV jammer This standard specifies the technical requirements and test methods of the portable UAV jamming interceptor (hereinafter referred to as interceptor).
This standard is applicable to portable UAV jamming interceptor products.
2. Product model:
BCSK-BB008(box type) BCSK-ST001 (knapsack) BCSK-QS005(Qiang type)
3. Product description
The interceptor uses 3 types of portable rifle type, which mainly controls the unmanned aerial vehicle or flight mode under the flight condition, cut off the connection between the unmanned aerial vehicle and the remote control. The interceptor can force the unmanned aerial vehicle to be forced to fall or return to the air by the interceptor, so as to ensure the low air space safety in the area.
4, product function:
4.1, cut off all connections between UAVs and controllers: UAV remote control is out of order.
4.2, UAV Ground Control can not receive aerial photos and videos.
4.3, UAVs cannot be positioned; interceptors can force UAVs to land or return.
5. The weight and size of the host:
5.1, host weight: less than 13 kg (including built-in battery);
5.2, mainframe size: long 37cm, wide 30cm, high 19cm;
5.3. The back of the host design
The effective control distance for UAV targets is 1000-5000 meters. Built in lithium battery for 120 minutes.
The general measurement of the weight and size of the host is measured. Host appearance mode detection interceptor effective control distance
6, test methods can be tested in two ways:
6.1, actual wide area outfield testing maximum control distance (if there are space test conditions).
The actual maximum intercept distance for the target UAV is tested.
6.2, the maximum control distance of the equivalent test
The equivalent calculation formula of the maximum control distance of Interceptor: the theoretical distance of the unmanned aerial vehicle (unmanned aerial vehicle) (the control distance of the interceptor field actual test / the actual remote control distance of the UAV);
6.3, UAV remote control failure, unable to locate (GPS/ Beidou /GLONASS), map transmission failure.
7,Emission frequency and power test:
|
|
Frequency band
|
|
Explain
|
|
|
|
|
|
|
ANT1
|
1560~1620MHz
|
|
The navigation and positioning GPS signal is weak, for the overall weight and power consumption of the equipment, the power can be 10W, the interference effect of the power interference source and the F1 frequency band remote control interference effect is equal. 10W
|
|
ANT2
|
2400~2486MHz
|
|
The remote control signal is a point to point communication, the power is concentrated at one point, and the remote control distance is controlled further. All the high power modules must be used to reach the effective interference distance. 30W
|
|
ANT3
|
5720~5850MHz
|
|
The unmanned aerial vehicle (UAV) has a wide frequency transmission frequency, and the transmission loss of the UAV transmission equipment is large. It is equal to the interference effect of 10W and the effect of the F1 band remote control interference for the whole equipment. 5W
|
UAV jamming and interception system (portable) is a high-power UAV interception equipment developed by Shenzhen Bochuang space-time Communication Technology Co., Ltd. It interferes with the UAV frequency band and the transmission of downlink frequency signals, resulting in the failure of remote control and the failure of image and video return, forcing the UAV to hover in the air. Turn and land, and completely cut off the connection between the UAV and the remote control or ground station, especially for the use of prisons, detention centers, schools, concerts, conference rooms, drug treatment centers, confidential institutions and the army.
