|Place of Origin:||shenzhen|
|Minimum Order Quantity:||1|
|Payment Terms:||D/A, D/P, T/T, Western Union|
Four, installation and use instructions
4.1 installation steps and methods
4.1.1 remove the shield machine from the box.
4.1.2 turns the antenna into its respective antenna pedestal, otherwise it will not be effective.
4.1.3 put the shield on the wall or the corresponding location, the best installation height is 1-2 meters.
4.1.4 first make sure that the shield machine is full of electricity, then turn on the power switch. The power indicator on the power supply indicates that it is starting to work.
4.2 matters of attention
4.2.1 must first install the antenna according to the corresponding identification on the host, and then connect the main power supply.
The effective coverage of the 4.2.2 shield is a circular area with the center of the shield, so it is careful to choose the placement position of the shield in order to avoid the shielding dead angle.
The 4.2.3 shield should be placed in a well ventilated place, avoiding the shielding of large objects and avoiding the strong electric and magnetic sources of the strong heat source, so as to ensure the shielding effectiveness and long stable work.
4.2.4 shields should not stack other items and dismantle the antenna when they work, so as not to affect the shielding effect and damage the machine.
When the 4.2.5 shield is not in use, it should cut off the power in time, so as not to affect the normal use of the mobile phone.
4.2.7 should pay attention to waterproofing when using shields outside.
4.2.7 when the area of the site is larger than the effective shielding range, it is recommended to adopt multiple shielding honeycomb installations to ensure shielding effectiveness.
4.2.8 because the power supply and antenna are matched with the main engine, they are debugged one by one when they are debugged. Please try not to use them interchangeably, so as to ensure the best effect.
4.2.9 please keep away from corrosive gases and liquids and do well in dust prevention and moisture prevention, so as not to accelerate the aging of internal components of equipment.
When placing 4.2.10 outside or in the wild, we should pay attention to adding protection devices to rats and ants.
Five. Maintenance and maintenance
5.1 the spacetime shield is a maintenance free device without maintenance.
5.2 when surface cleaning is done, chemical solvents should be banned and water inflow should be avoided.
5.3 shields should be stored in dry and ventilated places when they are useful, so as to avoid prolonged exposure to salt spray and harmful gases.
5.4 shields warranty period of one year, life-long maintenance.
Six. The answer to the problem
6.1 when the signal jammers work, why do some cell phone signals still indicate signals?
Answer: This is just an illusion. In fact, the mobile phone is already unable to communicate. When you press the pull button at random, you will find that there is no signal indication on the signal indicator.
6.2 will the signal shield interfere with the normal operation of other electronic devices?
Answer: No, no. This is because the electromagnetic signals emitted by the signal shields fall entirely within the prescribed mobile phone working frequency band, which only blocks the communication of mobile phones. This signal is always in a relatively static state, and will not affect any electronic device.
6.3 is the signal shielding device harmful to human body and cell phone?
Answer: please feel relieved that the intensity of the electromagnetic signal emitted by the blooad space-time signal shield is very weak, and has passed the Guangdong Provincial Health Bureau, the microwave radiation test certification, and the test data show that the intensity of this signal is far from harm to the human body. At the same time, the signal shield is only blocking the forward signal of the mobile phone, so that the cell phone can not contact the base station, so it will not cause any damage to the phone itself.
6.4 is there any difference in the distance between the signal shields when used indoors and outdoors?
Answer: Yes. The effective distance of the signal shield (1-40 meters, depending on the distance between different environments) generally refers to the indoor distance. In outdoor open areas, the effective distance of shielding can reach several hundred meters. It should be pointed out that, whether in indoor or outdoor use, the effective distance of the shield is related to the environment conditions at that time, such as the distance from the base station, the location of the place and so on. Therefore, when using the signal shield, we should give full consideration to this factor and avoid shielding dead angle, thus affecting the shielding effect.
6.5 does the signal shield have the same effect on GSM phones and CDMA phones?
Answer: this question is a good question. Because the anti-interference performance of the CDMA mobile phone is far superior to the GSM mobile phone, the effective shielding distance of the signal shield for the CDMA cell phone is less than that of the GSM cell phone, but the difference is not very large, about 2-4 meters. But it also asks the user to pay attention to some particularly important places, and should increase the number of field signal shields when necessary in order to ensure the shielding effectiveness of the CDMA mobile phone.
6.6 when the signal shield is working for a period of time, the shell is hot. Will it damage the machine for a long time?
Answer: Thank you for your careful, this is a normal phenomenon. In design, we use the thermal conductivity of aluminum alloy wire drawing shell to assist heat dissipation. It can guarantee long time stable work. As a result, the machine will not be damaged by the heat of the shell.
Shenzhen Bo Chuang space-time Communication Technology Co., Ltd. has a professional technical R & D production team, many years of international trade wholesale sales experience, integrity, strength and product quality received recognition by the industry, providing mobile signal shield, GPS shield, unmanned aircraft shield, WIFI network shield, amplifier, detector OEM/ODM service Welcome new and old customers customized products, visit, guide and business negotiations.
Signal shield BCSK-101B-8 prison prison high power 4G shield