|Place of Origin:||shenzhen|
|Minimum Order Quantity:||1|
|Payment Terms:||D/A D/PT/T Western Union MoneyGram|
|CALL:||+86013798491049||Frequency:||Global GPS + Beidou Satellite + GLONASS|
|Car Power Supply:||12V-24V|
The US GPS Beidou jammer direct dipper 12V-24V power supply trolley location anti tracking jammer Beidou satellite jamme
|Of the goods||Vehicle GPS signal jammer|
|model||BCSK - mini double|
GPS Signal Jammer vehicle jammer Beidou Positioning anti tracking vehicle jammer signal interrupter
effective prevention by GPS satellite positioning and tracking effectively interfere with the GPS satellite signal Beidou GPS signal to protect your car's whereabouts privacy and information confidential.
interfere with all current GPS Beidou GPS satellite positioning signal.
the working hours do not affect the normal use of mobile phones or other electronic devices.
Vehicle 12VDC fuse protection line
small size large powerlight weight large coverageeasy to carry.
A vehicle equipped with GPS positioning or navigation in place of application
Four installation and use instructions
4.1 installation steps and methods
4.1.1 remove the shield machine from the box.
4.1.2 turns the antenna into its respective antenna pedestal otherwise it will not be effective.
4.1.3 put the shield on the wall or the corresponding location the best installation height is 1-2 meters.
4.1.4 first make sure that the shield machine is full of electricity then turn on the power switch. The power indicator on the power supply indicates that it is starting to work.
4.2 matters of attention
4.2.1 must first install the antenna according to the corresponding identification on the host and then connect the main power supply.
The effective coverage of the 4.2.2 shield is a circular area with the center of the shield so it is careful to choose the placement position of the shield in order to avoid the shielding dead angle.
The 4.2.3 shield should be placed in a well ventilated place avoiding the shielding of large objects and avoiding the strong electric and magnetic sources of the strong heat source so as to ensure the shielding effectiveness and long stable work.
4.2.4 shields should not stack other items and dismantle the antenna when they work so as not to affect the shielding effect and damage the machine.
When the 4.2.5 shield is not in use it should cut off the power in time so as not to affect the normal use of the mobile phone.
4.2.7 should pay attention to waterproofing when using shields outside.
4.2.7 when the area of the site is larger than the effective shielding range it is recommended to adopt multiple shielding honeycomb installations to ensure shielding effectiveness.
4.2.8 because the power supply and antenna are matched with the main engine they are debugged one by one when they are debugged. Please try not to use them interchangeably so as to ensure the best effect.
4.2.9 please keep away from corrosive gases and liquids and do well in dust prevention and moisture prevention so as not to accelerate the aging of internal components of equipment.
When placing 4.2.10 outside or in the wild we should pay attention to adding protection devices to rats and ants.
Five. Maintenance and maintenance
5.1 the shield is a maintenance free device without maintenance.
5.2 when surface cleaning is done chemical solvents should be banned and water inflow should be avoided.
5.3 shields should be stored in dry and ventilated places when they are useful so as to avoid prolonged exposure to salt spray and harmful gases.
5.4 shields warranty period of one year life long maintenance.
Six. The answer to the problem
6.1 when the signal jammers work why do some cell phone signals still indicate signals?
Answer This is just an illusion. In fact the mobile phone is already unable to communicate. When you press the pull button at random you will find that there is no signal indication on the signal indicator.
6.2 will the signal shield interfere with the normal operation of other electronic devices?
Answer: No no. This is because the electromagnetic signals emitted by the signal shields fall entirely within the prescribed mobile phone working frequency band which only blocks the communication of mobile phones. This signal is always in a relatively static state and will not affect any electronic device.
6.3 is the signal shielding device harmful to human body and cell phone?
Answer: please rest assured that the electromagnetic signal emitted by the signal shield is weakand the test data show that the intensity of the signal is far from harm to the human body. At the same time the signal shield is only blocking the forward signal of the mobile phone so that the cell phone can not contact the base station so it will not cause any damage to the phone itself.
6.4 is there any difference in the distance between the signal shields when used indoors and outdoors?
Answer: Yes. The effective distance of the signal shield ( 30-40meters) generally refers to the indoor distance. In outdoor open areas the effective distance of shielding can reach several hundred meters. It should be pointed out that whether in indoor or outdoor use the effective distance of the shield is related to the environment conditions at that time such as the distance from the base station the location of the place and so on. Thereforewhen using the signal shieldwe should give full consideration to this factor and avoid shielding dead anglethus affecting shielding effectiveness.
6.5 does the signal shield have the same effect on GSM phones and CDMA phones?
Answer: this question is a good question. Because the anti interference performance of the CDMA mobile phone is far superior to the GSM mobile phone the effective shielding distance of the signal shield for the CDMA cell phone is less than that of the GSM cell phone but the difference is not very large about 2-4 meters. But it also asks the user to pay attention to some particularly important places and should increase the number of field signal shields when necessary in order to ensure the shielding effectiveness of the CDMA mobile phone.
6.6 when the signal shield is working for a period of time the shell is hot. Will it damage the machine for a long time?
Answer: Thank you for your careful this is a normal phenomenon. In design we use the thermal conductivity of aluminum alloy wire drawing shell to assist heat dissipation. It can guarantee long time stable work. As a result the machine will not be damaged by the heat of the shell.
Shenzhen Bo Chuang spacetime Communication Technology Co.Ltd. has a professional technical research and development production teammany years of international trade wholesale sales experienceintegrity strength and product quality have been recognized by the industry provide shield amplifier services welcome new and old custom-made products visit guide and business negotiation.
GPS Signal Jammervehicle jammer Beidou Positioning anti trackingvehicle jammer signal interrupter